Ok these are the Drives that the 360 uses make sure you get the right drive!

HERE IS A GOOD VIDEO FROM YOU TUBE SHOWING YOU HOW TO DO THIS!



Now If you have a BEN-Q System you need to unsolder the wires and resolder them back on...

Now you all should Know How to Fix THE RED LIGHT OF DEATH!
You can go here to get the codes

http://forum.teamxbox.com/showthread.php?t=472553

Ok lets talk about some of these that you mite see all the time...

E74

Ok I do say yes if you are going to do the red ring fix on the GPU side for this go ahead and the other side for the CPU because you mite get 0022, But here is a video showing what you need to do...


Now I do it different I take off the heat sink and wait till it 2 red rings... ya it is some weird voodoo stuff but it works... Ok after it is Done 2 red rings I let it sit like that for a Minute or 2... then I take the heat sink and press down on it and then turn it on.. AFTER i put new thermal compound and YES do not just do it on the the 2 chips COVER THE HOLE CHIP then then wait and see if you get the green lights after you do and you get in the dashboard shut it down and do the rest like the video...

NOW THE 0102 Is you normal Red ring Fix and if it still red rings after you do it yes but it in a shirt or 2 and let it cook for 45mins or some times it does 2 red ring and if it does that then shutdown and start her back up... then you are good.. but again when you do the normal red ring fix YES cover the hole chip with thermal compound not the little chips the hole chip... it does help trust me!

and here is a video to show you how to fix the normal red rings


Here the the Error codes that you can use this fix, to fix them...